0
0
Data centers today span an enormous range of scale, architecture, and criticality — from small edge computing rooms to hyperscale AI campuses drawing tens of megawatts. Meeting this diversity requires a power backup partner with breadth across chemistries, voltages, and deployment formats. Shenzhen Center Power Tech Co., Ltd., operating under the Vision Battery and Vision Group brands, has built exactly this kind of portfolio, drawing on 32 years of industry experience and more than 800 delivered energy solutions across over 100 countries and regions.
Understanding the Range of Data Center Power Needs
Data center operators face rising requirements for high power density, mission-critical reliability, lower PUE, total cost of ownership (TCO) reduction, fast deployment, ESG compliance, and alignment with next-generation high-voltage DC architecture. No single battery format can answer all of these needs at once. Vision Group addresses this by offering a full matrix of eleven AIDC-focused products spanning UPS lithium battery systems, lead-acid systems, prefabricated and energy storage systems, and high-voltage DC and rack-level backup systems — allowing customers to match the exact solution to their facility's scale and architecture.
Lithium Battery Systems Tailored to UPS Scale
Single-Phase UPS Solutions for Edge and Small Facilities
For smaller UPS installations and distributed backup power, the REVO SP Series lithium iron phosphate (LFP) system covers a wide voltage range — SP12, SP36, SP48, SP51.2, SP72, and SP192 — spanning 12V to 192V single-phase UPS DC buses. This wide coverage solves a common pain point in the market, where typical single-phase lithium batteries rely on narrow 12V or 48V module stacking with weak communication and poor host matching. The REVO SP Series adds high-rate LFP response for fast switching during grid fluctuation, long cycle life to lower full-lifecycle cost, modular configuration to avoid over- or under-provisioning, and intelligent BMS management with SOC/SOH, temperature, and alarm monitoring integrated with DCIM/EMS platforms. This makes it well suited to small UPS units, edge computing rooms, and distributed backup power scenarios.
Three-Phase UPS Solutions for Hyperscale AI Data Centers
Larger AI data centers and critical facilities need far greater power density. The REVO TP Series addresses this directly: the TPX600 single cabinet supports up to 600 kW, meaning a 1.2 MW UPS configuration requires only two cabinets — around 90% less floor space than conventional solutions. The series supports up to 10C continuous discharge and 30C pulse discharge to handle AI load transients, and its TPX, TP, TPH, and TPL variants provide continuous coverage from 40 kW to 600 kW. Active balancing and liquid cooling improve cell consistency and extend system life, while a ten-layer safety design protects the system from the cell level through electrical isolation to fire suppression. Communication compatibility with Modbus TCP, Modbus, and Redfish allows coordination with UPS, DCIM, and EMS systems. This series has been deployed in numerous large-scale projects, including the 112 MW Malaysia BDC project with 448 REVO TP200 units and the 130 MW Mercury project with 520 battery racks.
Lead-Acid Systems for Cost-Sensitive Backup
Not every backup requirement calls for lithium chemistry. Vision Group's HFS High-Power Lead-Acid System is designed for short-time, high-power discharge in 5–15 minute scenarios common in data centers, using high-power paste and high-tin low-calcium alloy for stronger grid corrosion resistance, with front-terminal models that save cabinet space. For larger UPS backup needs, the 2V Large High-Power Lead-Acid System offers UPS2000, UPS2800, and UPS4000 capacity options with high-rate discharge and low voltage drop, providing a lower initial-cost complement to lithium in extra-large-capacity backup scenarios across data centers, telecom, power, and industrial applications.
Prefabricated and Liquid-Cooled Energy Storage for Rapid, Large-Scale Deployment
For campus-level and centralized backup needs, the PTU Lithium Prefabricated Cabin delivers factory-built, modular power in 1.8 MW to 3.5 MW increments, reducing on-site construction and commissioning time while integrating fire suppression, thermal control, and BMS management for consistent quality. The BESS Immersion Liquid-Cooled Energy Storage Integrated Unit combines backup and storage in a 241 kWh design, with cells fully immersed in insulating coolant to isolate oxygen and reduce thermal runaway risk. For the largest outdoor deployments, the BESS Large Liquid-Cooled Energy Storage Battery Cabin (CBES-5MWh / 6.48MWh) offers IP55 outdoor protection and multi-mode operation covering backup, peak shaving, dynamic capacity expansion, and PV-storage-DC-flex integration — supporting AIDC campus storage without occupying indoor machine room space.
Next-Generation 800V HVDC and Rack-Level Systems
As AI racks move toward 800V DC architecture, Vision Group has developed dedicated solutions rather than relying on boost-converted legacy systems. The AIDC 800V HVDC Storage-Backup Integrated System with Energy Storage combines backup power with dispatchable energy storage, using semi-immersion liquid cooling and achieving system efficiency of 92% or higher through direct 800V DC connection, with full IP55 outdoor deployment. This system was applied in the Inner Mongolia Ulanqab benchmark project, a hyperscale AI data center for a China video content platform with daily active users exceeding 900 million in 2024, where grid connection and commissioning were completed on January 18, 2026. Complementary offerings scheduled for 2026 release include the 800V HVDC Backup Power System without Energy Storage, built natively for 800V DC buses with 16 to 24 modular configurations and hot-swappable design; the BBU Short-Time Backup Unit covering 48/54V to 800V DC from single-rack to megawatt scale; and the LiLic Sidecar Ultra-Fast Response Backup System, a 1MW 800V solution placed close to AI racks for instantaneous load support.
Global Delivery Capability and Proven Track Record
Behind this product breadth sits substantial delivery capacity: five global R&D and manufacturing bases, more than 3,000 employees, over 1,000 patents, and annual production capacity exceeding 12 GWh. Vision Group's systems have been deployed in projects ranging from a 6 MW installation in the Philippines to the 130 MW Mercury project, with clients including hyperscale cloud providers, third-party data center operators, UPS manufacturers, and telecom operators across markets such as Malaysia, Hong Kong, Spain, Russia, Brazil, and Japan.
A Trusted Partner Across Certifications and Industry Recognition
Vision Group's offerings carry certifications including US UL 9540A and UL 1973, EU CE, German VDS, Indian BIS, Korean KC, Saudi SASO, EU RoHS, International CB and IEC, and UN38.3, alongside recognitions such as the 2025 China Energy Storage Industry Outstanding Battery Supplier award and inclusion in the 2025 Global New Energy Enterprise 500. Combined with deep partnerships with UPS manufacturers such as Vertiv, Schneider Electric, Eaton, Socomec, and Delta, these credentials support Vision Group's positioning as a smart energy solutions provider for data centers, computing centers, communication facilities, and edge computing nodes — matching backup power precisely to each customer's power requirement, budget, and architecture.
https://www.vision-batt.com/en
Shenzhen Center Power Tech Co., Ltd.
Average Rating